D1 1" D2 1" OAL 4" LOC 1-1/2" Standard ZrN Coated .050” Standard ALU .050”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/8" D2 1/8" OAL 1-1/2" LOC 1/2"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/8" D2 1/8" OAL 1-1/2" LOC 1/2" Standard ZrN Coated .009” Standard ALU .009”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4" Standard ZrN Coated .012” Standard ALU .012”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 5/16" D2 5/16" OAL 2-1/2" LOC 3/4" Standard ZrN Coated .015”” Standard ALU .015”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 3/8" D2 3/8" OAL 2-1/2" LOC 7/8" Standard ZrN Coated .020” Standard ALU .020”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/2" D2 1/2" OAL 3" LOC 1-1/4" Standard ZrN Coated .025” Standard ALU .025”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4" Standard ZrN Coated .030” Standard ALU .030”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 3/4" D2 3/4" OAL 4" LOC 1-1/2" Standard ZrN Coated .040” Standard ALU .040”
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/8" D2 1/8" OAL 1-1/2" LOC 1/2"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 3/16" D2 3/16" OAL 2" LOC 5/8" Our 3 flute end mills feature a 45° Helix Angle, Variable Index Flutes and are Center Cutting. This geometry gives them excellent chip removal capability especially at high RPM/high feed rate applications so common in today’s high-speed machining applications. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills
D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills